Products
Decorative LineLine of innovative products allowing you to make sophisticated, sought after effects. These include gradients, transparencies and special aesthetic finishes which are perceptible to the touch.
LIME RESTORE is a mixture of special surfactants and a selection of fillers and comes in a water based emulsion. Thanks to the delicate balance of its components, it is particularly suitable for cleaning walls covered in Antique Stucco, Spatula, faux-finishing, lime-based products in general but also marble and tiles. It regenerates the original surface’s appearance. Walls subject to constant treatment remain stable over time without suffering discolouration.
.USAGE
LIME RESTORE is used in order to polish, preserve and restore prestigious decorative finishes. The use of this finish allows you to clean and protect the area concerned, delaying the natural deterioration of the product.
.APPLICATION
LIME RESTORE should be used without dilution. Apply energetically with a sponge or cloth until the affected area is clean. Next, remove any excess product left on the surface using a damp cloth. In order to prevent dirt from penetrating deep into the substrate which is difficult to remove. It is recommended that this work be performed frequently, especially in areas close to heat sources, household appliances, or in areas subject to unwanted sediment.
.
SAPONE DI MARSIGLIA is a mixture of special soaps and natural plant based waxes and comes in an aqueous emulsion. Thanks to the careful balance of its components it is particularly suited to protecting and waterproofing walls covered in Antique stucco, Spatula and lime-based products, while maintaining breathability. Treated walls remain stable over time without suffering discolouration. A key feature of this product is its ability to leave a surface’s original appearance, even one finished in a subtle colour, unchanged.
.USAGE
SAPONE DI MARSIGLIA is used in order to protect, preserve and strengthen prestigious decorative finishes. When used, the area to which the product is applied is made firmer. By penetrating into the surface’s pores, the product gives it greater resistance to external elements. This is a natural side effect as the product deteriorates.
.APPLICATION
SAPONE DI MARSIGLIA must be used undiluted on dry surfaces. Apply the wax using a sponge, cloth or brush until the surface will absorb no more. Remove the excess product left on the surface with a cloth. After about 30 minutes, and no more than 2 hours, polish with a special cloth, stainless steel spatula or by using a polisher with a woollen head. Protect exterior finishes from rain for at least 48 hours, so as not to compromise their protective and decorative properties.
.
CERA IN PASTA is a mixture of particular synthetic resins and natural beeswax and comes in a water based emulsion. It is particularly suited to making walls using Antique Stucco, Spatula and Lime-based products bright and waterproof without changing the natural appearance of the surface. This is thanks to the careful balance of its components. Treated walls remain stable over time without suffering discolouration.
.USAGE
CERA IN PASTA is used in order to protect, preserve, and strengthen prestigious decorative finishes. When used, the area to which the product is applied is made firmer. By penetrating into the surface’s pores, the product gives it greater resistance to external elements. This is a natural side effect as the product deteriorates.
.APPLICATION
CERA IN PASTA must be used undiluted on dry surfaces. Apply the wax using a sponge, cloth or brush until the surface will absorb no more. Remove the excess product left on the surface with a cloth. After about 30 minutes, and no more than 2 hours, polish with a special cloth, stainless steel spatula or by using a polisher with a woollen head. Protect exterior finishes from rain for at least 48 hours, so as not to compromise their protective and decorative properties.
.
CERA LUCIDA is a mixture of particular synthetic resins and natural beeswax and comes in a water based emulsion. It is particularly suited to making walls using Antique Stucco, Spatula and Lime-based products bright and waterproof without changing the natural appearance of the surface. This is thanks to the careful balance of its components. Treated walls remain stable over time without suffering discolouration.
.USAGE
CERA LUCIDA is used in order to protect, preserve, and strengthen prestigious decorative finishes. When used, the area to which the product is applied is made firmer. By penetrating into the surface’s pores, the product gives it greater resistance to external elements. This is a natural side effect as the product deteriorates.
.APPLICATION
CERA LUCIDA must be used undiluted on dry surfaces. Apply the wax using a sponge, cloth or brush until the surface will absorb no more. Remove the excess product left on the surface with a cloth. After about 30 minutes, and no more than 2 hours, polish with a special cloth, stainless steel spatula or by using a polisher with a woollen head. Protect exterior finishes from rain for at least 48 hours, so as not to compromise their protective and decorative properties.
.
CERA LUCIDA EXTRA is a mixture of particular synthetic resins and natural beeswax and comes in a water based emulsion. It is particularly suited to making walls using Antique Stucco, Spatula and Lime-based products bright and waterproof without changing the natural appearance of the surface. This is thanks to the careful balance of its components. Treated walls remain stable over time without suffering discolouration.
.USAGE
CERA LUCIDA EXTRA is used in order to protect, preserve, and strengthen prestigious decorative finishes. When used, the area to which the product is applied is made firmer. By penetrating into the surface’s pores, the product gives it greater resistance to external elements. This is a natural side effect as the product deteriorates. This material is recommended for when you need strong resistance, especially outdoors.
.APPLICATION
CERA LUCIDA EXTRA must be used undiluted on dry surfaces. Apply the wax using a sponge, cloth or brush until the surface will absorb no more. Remove the excess product left on the surface with a cloth. After about 30 minutes, and no more than 2 hours, polish with a special cloth, stainless steel spatula, or by using a polisher with a woollen head. Protect exterior finishes from rain for at least 48 hours, so as not to compromise their protective and decorative properties. Protect exterior finishes from rain for at least 48 hours, so as not to compromise its protective and decorative qualities.
.
Brush
.
Brush
Spray Airless
CERA METAL LUX is a mixture of special synthetic resins and natural beeswax in water emulsion, with added pearlescent natural dyes that give the product its characteristic decorative impact. This makes it possible to reproduce extraordinarily fine effects, bringing out the artistic side in whoever is applying the product. This process is able to make walls covered in Antique Stucco, Spatula, and Lime-based products waterproof, and keep them stable and shiny over time.
.USAGE
CERA METAL LUX is used in order to protect, preserve, and strengthen prestigious decorative finishes. When used, the area to which the product is applied is made firmer. By penetrating into the surface’s pores, the product gives it greater resistance to external elements. This is a natural side effect as the product deteriorates.
.APPLICATION
CERA METAL LUX must be used undiluted on dry surfaces. Apply the wax using a sponge, cloth or brush until the surface will absorb no more. Remove the excess product left on the surface with a cloth. After about 30 minutes, and no more than 2 hours, polish with a special cloth, stainless steel spatula, or by using a polisher with a woollen head.
.
Brush
.
Brush
VELATURA CRYSTAL is a product with great decorative qualities. It’s based on special odourless resins with VOC = 0 water dispersion and special metallic pigments. These pigments are finely dispersed and resistant to light exposure and alkalis. Sheer, shaded, and antique effects can all be achieved depending on the type of application, combining classic style with modern design. The unique thing about this finish is that it reproduces"velvet" effect reflections, which are variable according to the angle of light reflection. The product is resistant to most common detergents and has a good tolerance to washing, impact, and abrasion. Thanks to its make up, it is also suitable for outdoor use and has excellent adhesion.
.USAGE
VELATURA CRYSTAL is a protective as well as a decorative paint. It is elastic, breathable, and smooth matt in appearance. It has excellent water repellency, discrete vapour permeability and can be used on any wall surface after suitable surface preparation.
.SURFACE PREPARATION
The surface to be decorated must be smooth, dry, free of dust and dirt, mould and algae-free, clean of any flakes of paint, oil, grease or other deposits. To that end (and especially when applying to imperfect walls) you may need to scrape, abrade or apply a smoothing type paste or putty powder to the surface manually in order to get a smooth surface. For high quality decoration we recommend the application of Acril Super Matt - a washable paint. Coloured or non-coloured paint can be used with a glazed finish, depending on the desired effect. It is always advisable to carry out this treatment when the surface has impurities or very different levels of absorption.
.
Brush
VELATURA SABBIA is a product with great decorative qualities. It’s based on special odourless resins with VOC = 0 water dispersion, a selection of particle sized mica powders, and special metallic pigments. These pigments are finely dispersed and resistant to light exposure and alkalis. Sheer, shaded, and antique effects can all be achieved depending on the type of application, combining classic style with modern design. The unique thing about this finish is that it reproduces "sandblast" effect reflections, which are variable according to the angle of light reflection. The product is resistant to most common detergents and has a good tolerance to washing, impact, and abrasion. Thanks to its make up, it is also suitable for outdoor use and has excellent adhesion.
.USAGE
VELATURA SABBIA is a protective as well as a decorative paint. It is both elastic and breathable, with a dull, rough appearance. It has excellent water repellency, discrete vapour permeability and can be used on any wall surface after suitable surface preparation.
.SURFACE PREPARATION
The surface to be decorated must be smooth, dry, free of dust and dirt, mould and algae-free, clean of any flakes of paint, oil, grease or other deposits. To that end (and especially when applying to imperfect walls) you may need to scrape, abrade or apply a smoothing type paste or putty powder to the surface manually in order to get a smooth surface. For high quality decoration we recommend the application of Acril Super Matt - a washable paint. Use coloured or non-coloured paint with a glazed finish, according to the desired effect. It is always advisable to carry out this treatment when the surface has impurities or very different levels of absorption.
.
Brush
VELATURA ANTICO VENETO is a liquid transparent copolymer based acrylic emulsion containing numerous small white flakes. The product needs to be coloured. Given the precise balance of its raw materials this can be done with a tinting system using "toner" dyes. These dyes are thoroughly mixed in manually or by using a mixer at low speed. When mixing it is important not to destroy the chemical-physical make up of the flakes present in the mixture. These flakes integrate the power of the decorative glazing but do not absorb the added colour. The product is antistatic, resistant to common detergents, and has a good tolerance to washing, impact and abrasion. Thanks to its ability to withstand exposure to light and weathering it is also suitable for outdoor use.
.USAGE
VELATURA ANTICO VENETO is a protective as well as a decorative paint. It is elastic, water repellent, breathable, and opaque. It can be used on any wall surface after suitable surface preparation.
.SURFACE PREPARATION
The surface to be decorated must be smooth, dry, free of dust and dirt, mould and algae-free, clean of any flakes of paint, oil, grease or other deposits. To that end (and especially when applying to imperfect walls) you may need to scrape, abrade or apply a smoothing type paste or putty powder to the surface manually in order to get a smooth surface. For high quality decoration we recommend the application of Acril Super Matt - a washable paint. Use coloured or non-coloured paint with a glazed finish, according to the desired effect. It is always advisable to carry out this treatment when the surface has impurities or very different levels of absorption.
.
.
Brush
STUCCO DECORATIVO is a paste product based on special synthetic resins, selected micronised marble powders, and refined additives which all allow for an easy application with perfect substrate adhesion. Thanks to the characteristic composition is able to keep the colour constant over time even with bright shades. This product also enjoys high water repellency and excellent resistance to mould and alkalis. It maintains good resistance to moisture and has fair permeability to water vapour. This product is for exclusively decorative finishes, or very thick applications.
.USAGE
STUCCO DECORATIVE is a prestigious protective coating and finish for both for new and old surfaces. This product can be used on any type of surface after suitable surface preparation.
.SURFACE PREPARATION
The surface to be coated must be dry, free from dust and dirt and clean of any traces of non-adhering paint, oil, grease or other deposits. Before proceeding with the preparation coat, wait at least 28 days after any plaster has been applied. With highly absorbent plaster or when using pourous surfaces, the application of a type-A insulating primer or fixative with high penetration insulation is also recommended. In the presence of non-absorbent smooth surfaces proceed by applying FONDO RUSTICO.
.
.
Spray Airless
MATERIA is a paste product based on special synthetic resins, selected micronised marble powders, and refined additives which all allow for an easy application with perfect substrate adhesion. Thanks to the characteristic composition is able to keep the colour constant over time even with bright shades. This product also enjoys high water repellency and excellent resistance to mould and alkalis. It maintains good resistance to moisture and has fair permeability to water vapour. This product is for exclusively decorative finishes, or very thick applications.
.USAGE
MATERIA is a prestigious protective coating and finish for both for new and old surfaces. This product can be used on any type of surface after suitable surface preparation.
.SURFACE PREPARATION
The surface to be coated must be dry, free from dust and dirt and clean of any traces of non-adhering paint, oil, grease or other deposits. Before proceeding with the preparation coat, wait at least 28 days after any plaster has been applied. With highly absorbent plaster or when using porous surfaces, the application of a type-A insulating primer or fixative with high penetration insulation is also recommended. In the presence of non-absorbent smooth surfaces proceed by applying FONDO RUSTICO.
.
Brush
Solutions tailored
to the customer.
Visit the Customisations section to get a one-off product which reflects your needs by working together with Colorificio Veneto’s technicians.
For more information about the products in our catalog please contact us or fill out the form below.
